Peptide Bond Formation Research Articles

On the Re-Creation of Protoribosome Analogues in the Lab

The evolution of the translation system is a fundamental issue in the quest for the origin of life. A feasible evolutionary scenario necessitates the autonomous emergence of a protoribosome capable of catalyzing the synthesis of the initial peptides. The peptidyl transferase center (PTC) region in the modern ribosomal large subunit is believed to retain a vestige of such a prebiotic non-coded protoribosome, which would have self-assembled from random RNA chains, catalyzed peptide bond formation between arbitrary amino acids, and produced short peptides. Recently, three research groups experimentally demonstrated that several distinct dimeric constructs of protoribosome analogues, derived predicated on the approximate 2-fold rotational symmetry inherent in the PTC region, possess the ability to spontaneously fold, dimerize, and catalyze the formation of peptide bonds and of short peptides. These dimers are examined, aiming at retrieving information concerned with the characteristics of a prebiotic protoribosome. The analysis suggests preconditions for the laboratory re-creation of credible protoribosome analogues, including the preference of a heterodimer protoribosome, contradicting the common belief in the precedence of homodimers. Additionally, it derives a dynamic process which possibly played a role in the spontaneous production of the first bio-catalyzed peptides in the prebiotic world.

Biodegradation Study of Styrene–Butadiene Composites with Incorporated Arthrospira platensis Biomass

The preparation of polymer composites that incorporate material of a biogenic nature in the polymer matrices may lead to a reduction in fossil polymer consumption and a potentially higher biodegradability. Furthermore, microalgae biomass as biogenic filler has the advantage of fast growth and high tolerance to different types of culture media with higher production yields than those provided by the biomass of terrestrial crops. On the other hand, algal biomass can be a secondary product in wastewater treatment processes. For the present study, an SBS polymer composite (SBSC) containing 25% (w/w) copolymer SBS1 (linear copolymer: 30% styrene and 70% butadiene), 50% (w/w) copolymer SBS2 (linear copolymer: 40% styrene and 60% butadiene), and 25% (w/w) paraffin oil was prepared. Arthrospira platensis biomass (moisture content 6.0 ± 0.5%) was incorporated into the SBSC in 5, 10, 20, and 30% (w/w) ratios to obtain polymer composites with spirulina biomass. For the biodegradation studies, the ISO 14855-1:2012(E) standard was applied, with slight changes, as per the specificity of our experiments. The degradation of the studied materials was followed by quantitatively monitoring the CO2 resulting from the degradation process and captured by absorption in NaOH solution 0.5 mol/L. The structural and morphological changes induced by the industrial composting test on the materials were followed by physical–mechanical, FTIR, SEM, and DSC analysis. The obtained results were compared to create a picture of the material transformation during the composting period. Thus, the collected data indicate two biodegradation processes, of the polymer and the biomass, which take place at the same time at different rates, which influence each other. On the other hand, it is found that the material becomes less ordered, with a sponge-like morphology; the increase in the percentage of biomass leads to an advanced degree of degradation of the material. The FTIR analysis data suggest the possibility of the formation of peptide bonds between the aromatic nuclei in the styrene block and the molecular residues resulting from biomass biodegradation. It seems that in industrial composting conditions, the area of the polystyrene blocks from the SBS-based composite is preferentially transformed in the process.

C-C Bond Cleavage-Induced C- to N-Acyl Transfer for Synthesis of Amides.

A new approach for the preparation of amides was developed using C-C bond cleavage that initiates C- to N-acyl transfer, employing activated ketones as acylation reagents and amine nucleophiles. The reaction was operational under the coupling reagent system that is commonly utilized for peptide bond formations. The method enables practical preparation of amides using linear and cyclic ketone substrates under mild conditions.

Rapid Synthesis of Peptides Mediated by PPh3‐I2

We report a mild, operationally simple, convenient, and rapid method of peptide bond formation using triphenylphosphine and iodine. The developed protocol was utilized to couple coded, non‐coded, and challenging amino acids in 64–92% yield. Sterically hindered α,α‐disubstituted amino acids, which are important constituents of natural peptides, were also coupled in good yield. Mild reaction conditions in open air produce peptide bonds in a short time (30 min) without racemization.

Highly defective ultra-small tetravalent MOF nanocrystals

The size and defects in crystalline inorganic materials are of importance in many applications, particularly catalysis, as it often results in enhanced/emerging properties. So far, applying the strategy of modulation chemistry has been unable to afford high-quality functional Metal–Organic Frameworks (MOFs) nanocrystals with minimized size while exhibiting maximized defects. We report here a general sustainable strategy for the design of highly defective and ultra-small tetravalent MOFs (Zr, Hf) crystals (ca. 35% missing linker, 4–6 nm). Advanced characterizations have been performed to shed light on the main factors governing the crystallization mechanism and to identify the nature of the defects. The ultra-small nanoMOFs showed exceptional performance in peptide hydrolysis reaction, including high reactivity, selectivity, diffusion, stability, and show emerging tailorable reactivity and selectivity towards peptide bond formation simply by changing the reaction solvent. Therefore, these highly defective ultra-small M(IV)-MOFs particles open new perspectives for the development of heterogeneous MOF catalysts with dual functions.

RNA-Templated Peptide Bond Formation Promotes L-Homochirality.

The world in which we live is homochiral. The ribose units that form the backbone of DNA and RNA are all D-configured and the encoded amino acids that comprise the proteins of all living species feature an all-L-configuration at the α-carbon atoms. The homochirality of α-amino acids is essential for folding of the peptides into well-defined and functional 3D structures and the homochirality of D-ribose is crucial for helix formation and base-pairing. The question of why nature uses only encoded L-α-amino acids is not understood. Herein, we show that an RNA-peptide world, in which peptides grow on RNAs constructed from D-ribose, leads to the self-selection of homo-L-peptides, which provides a possible explanation for the homo-D-ribose and homo-L-amino acid combination seen in nature.

The SecM arrest peptide traps a pre-peptide bond formation state of the ribosome

Nascent polypeptide chains can induce translational stalling to regulate gene expression. This is exemplified by the E. coli secretion monitor (SecM) arrest peptide that induces translational stalling to regulate expression of the downstream encoded SecA, an ATPase that co-operates with the SecYEG translocon to facilitate insertion of proteins into or through the cytoplasmic membrane. Here we present the structure of a ribosome stalled during translation of the full-length E. coli SecM arrest peptide at 2.0 Å resolution. The structure reveals that SecM arrests translation by stabilizing the Pro-tRNA in the A-site, but in a manner that prevents peptide bond formation with the SecM-peptidyl-tRNA in the P-site. By employing molecular dynamic simulations, we also provide insight into how a pulling force on the SecM nascent chain can relieve the SecM-mediated translation arrest. Collectively, the mechanisms determined here for SecM arrest and relief are also likely to be applicable for a variety of other arrest peptides that regulate components of the protein localization machinery identified across a wide range of bacteria lineages.

RAPP-containing arrest peptides induce translational stalling by short circuiting the ribosomal peptidyltransferase activity

Arrest peptides containing RAPP (ArgAlaProPro) motifs have been discovered in both Gram-positive and Gram-negative bacteria, where they are thought to regulate expression of important protein localization machinery components. Here we determine cryo-EM structures of ribosomes stalled on RAPP arrest motifs in both Bacillus subtilis and Escherichia coli. Together with molecular dynamics simulations, our structures reveal that the RAPP motifs allow full accommodation of the A-site tRNA, but prevent the subsequent peptide bond from forming. Our data support a model where the RAP in the P-site interacts and stabilizes a single hydrogen atom on the Pro-tRNA in the A-site, thereby preventing an optimal geometry for the nucleophilic attack required for peptide bond formation to occur. This mechanism to short circuit the ribosomal peptidyltransferase activity is likely to operate for the majority of other RAPP-like arrest peptides found across diverse bacterial phylogenies.

Decomposing bulk signals to reveal hidden information in processive enzyme reactions: A case study in mRNA translation.

Processive enzymes like polymerases or ribosomes are often studied in bulk experiments by monitoring time-dependent signals, such as fluorescence time traces. However, due to biomolecular process stochasticity, ensemble signals may lack the distinct features of single-molecule signals. Here, we demonstrate that, under certain conditions, bulk signals from processive reactions can be decomposed to unveil hidden information about individual reaction steps. Using mRNA translation as a case study, we show that decomposing a noisy ensemble signal generated by the translation of mRNAs with more than a few codons is an ill-posed problem, addressable through Tikhonov regularization. We apply our method to the fluorescence signatures of in-vitro translated LepB mRNA and determine codon-position dependent translation rates and corresponding state-specific fluorescence intensities. We find a significant change in fluorescence intensity after the fourth and the fifth peptide bond formation, and show that both codon position and encoded amino acid have an effect on the elongation rate. This demonstrates that our approach enhances the information content extracted from bulk experiments, thereby expanding the range of these time- and cost-efficient methods.

Boronic Acid-Catalyzed Peptide Bond Formation from Serine- and Threonine-Derived Inert Esters

Boronic Acid-Catalyzed Peptide Bond Formation from Serine- and Threonine-Derived Inert Esters

Hydroxy-directed peptide bond formation from α-amino acid-derived inert esters enabled by boronic acid catalysis.

A boronic acid-catalyzed peptide bond formation from α-amino acid methyl esters is described. The catalysis showed high chemoselectivity for β-hydroxy-α-amino esters, affording the peptides in high to excellent yields with high functional group tolerance. This hydroxy-directed peptide bond formation could be applicable to oligopeptide syntheses. This is the first successful example of organoboron-catalyzed peptide bond formation from α-amino acid-derived inert esters.

Synergistic Photo-Redox Catalysis for Peptide Bond Formation

Synergistic Photo-Redox Catalysis for Peptide Bond Formation

A novel MB-tagged aptasensor for Aflatoxin B1 detection in food using Fe3O4 nanoparticles substantiated with in silico modelling

Aspergillus fungi species found in wheat, maize, rice, and other agricultural products produce the carcinogenic mycotoxin known as Aflatoxin B1 (AFB1), which can cause cancer in animals and humans. Consequently, recent interest has surged regarding the need for inexpensive, selective, and sensitive sensors to detect AFB1 in food. An ultrasensitive electrochemical aptasensor for AFB1 analysis was constructed using carboxylated multiwalled carbon nanotubes (cMWCNTs) and iron oxide (Fe3O4) nanoparticles (NP) on a glassy carbon electrode (GCE). The peptide bond formation by EDC coupling between the aptamer and cMWCNTs-Fe3O4 NP composite exhibited a strong anodic redox response from AFB1 using cyclic voltammetry (CV) in this study. Applying differential pulse voltammetry (DPV), the GCE/cMWCNTs-Fe3O4 NP aptasensor exhibited very low limits of detection (LOD) and quantification (LOQ) of 0.43 fg mL−1 and 1.44 fg mL−1 respectively over a calibration ranging from 0.50 fg mL−1 to 5.00 fg mL−1. For actual sample analysis, excellent spike recoveries from 95 to 105% were obtained for corn and rice flour. Single particle ICP-MS (spICP-MS) confirmed the average mass-based diameter of the synthesized Fe3O4 NPs to be in the nano-range (d ≈ 20 nm), the properties of which are essential for the facilitation of strong electron transfer in DPV sensing. Finally, density functional theory and molecular docking studies predicted the sensing mechanism and supported deductions based on the AFB1 capture by the employed aptamer respectively. As part of South Africa’s quality control and regulatory frameworks, this study aims to contribute toward the prevention of AFB1 exposure in foods.

Effect of montmorillonite K10 clay on RNA structure and function

One of the earliest living systems was likely based on RNA (“the RNA world”). Mineral surfaces have been postulated to be an important environment for the prebiotic chemistry of RNA. In addition to adsorbing RNA and thus potentially reducing the chance of parasitic takeover through limited diffusion, minerals have been shown to promote a range of processes related to the emergence of life, including RNA polymerization, peptide bond formation, and self-assembly of vesicles. In addition, self-cleaving ribozymes have been shown to retain activity when adsorbed to the clay mineral montmorillonite. However, simulation studies suggest that adsorption to minerals is likely to interfere with RNA folding and, thus, function. To further evaluate the plausibility of a mineral-adsorbed RNA world, here we studied the effect of the synthetic clay montmorillonite K10 on the malachite green RNA aptamer, including binding of the clay to malachite green and RNA, as well as on the formation of secondary structures in model RNA and DNA oligonucleotides. We evaluated the fluorescence of the aptamer complex, adsorption to the mineral, melting curves, Förster resonance energy transfer interactions, and 1H-NMR signals to study the folding and functionality of these nucleic acids. Our results indicate that while some base pairings are unperturbed, the overall folding and binding of the malachite green aptamer are substantially disrupted by montmorillonite. These findings suggest that minerals would constrain the structures, and possibly the functions, available to an adsorbed RNA world.

Practical N-to-C peptide synthesis with minimal protecting groups

Accessible drug modalities have continued to increase in number in recent years. Peptides play a central role as pharmaceuticals and biomaterials in these new drug modalities. Although traditional peptide synthesis using chain-elongation from C- to N-terminus is reliable, it produces large quantities of chemical waste derived from protecting groups and condensation reagents, which place a heavy burden on the environment. Here we report an alternative N-to-C elongation strategy utilizing catalytic peptide thioacid formation and oxidative peptide bond formation with main chain-unprotected amino acids under aerobic conditions. This method is applicable to both iterative peptide couplings and convergent fragment couplings without requiring elaborate condensation reagents and protecting group manipulations. A recyclable N-hydroxy pyridone additive effectively suppresses epimerization at the elongating chain. We demonstrate the practicality of this method by showcasing a straightforward synthesis of the nonapeptide DSIP. This method further opens the door to clean and atom-efficient peptide synthesis.

Synthetic Approaches towards Peptide‐Conjugates of Pt(II) Compounds with an (O,S) Chelating Moiety

AbstractMetal‐containing peptide (bio−)conjugates have received continuous interest due to their enormous potential for bioinorganic and medicinal research. In many bioconjugates the chemical inertness of the metal‐containing units facilitates synthesis e. g. by copper‐catalyzed alkyne−azide cycloaddition or the formation of peptide bonds. However, when the metal complex contains labile ligands, which are often critical to their biological activity, the synthetic proceeding requires careful planning. Here, we report on the synthesis of a set of peptide bioconjugates with a platinum(II) core, coordinated through widely variable (O,S) chelating β‐hydroxydithiocinnamic ester and two monodentate ligands. We have evaluated the synthetic applicability of metal−peptide bioconjugation techniques between the model peptide Leu5−enkephalin and differently functionalized (O,S)Pt units. Within this, the type and position of anchor used at the β‐hydroxydithiocinnamic unit proved to be crucial for success, but equally important was the synthetic order of conjugation and complexation. In this work, synthetic approaches for the linkage of metal complexes that are coordinated by functionalized ligands towards peptides were explored. Two general methods to link the studied (O,S)Pt pharmacophore to the model peptide, Leu5−enkephalin, have been applied, namely the most prominent “click” reaction, CuAAC, and the linking via amide bonds. Overall, it could be shown that the structural motif of the (O,S)Pt compounds presented here offers multiple possibilities of derivatization, so that bioconjugation towards peptides can be made possible. Depending on the demands made on the resulting metal bioconjugate, both the dithioester and the aromatic unit of β‐hydroxydithiocinnamic esters can be used as anchor for peptides. However, from our results here, it can be concluded that anchoring at the aromatic subsite seems preferable from a synthetic point of view as the spatial distance of the reactive terminal functional group (alkyne or azide) to the metal center may avoid intramolecular reactions. Also, for using azide−alkyne click chemistry as a conjugation strategy, the (O,S) unit should contain the azide function and not the alkyne function, as triple bond hydration may occur. Classical amide‐bond conjugation also proved to be a suitable method in our hands when performed in solution. A coupling of the β‐hydroxydithiocinnamic unit to resin‐bound peptide would not be possible due to the typically harsh cleavage conditions.

Elongation Factor P Modulates the Incorporation of Structurally Diverse Noncanonical Amino Acids into Escherichia coli Dihydrofolate Reductase.

The introduction of noncanonical amino acids into proteins and peptides has been of great interest for many years and has facilitated the detailed study of peptide/protein structure and mechanism. In addition to numerous nonproteinogenic α-l-amino acids, bacterial ribosome modification has provided the wherewithal to enable the synthesis of peptides and proteins with a much greater range of structural diversity, as has the use of endogenous bacterial proteins in reconstituted protein synthesizing systems. In a recent report, elongation factor P (EF-P), putatively essential for enabling the incorporation of contiguous proline residues into proteins, was shown to facilitate the introduction of an N-methylated amino acid in addition to proline. This finding prompted us to investigate the properties of this protein factor with a broad variety of structurally diverse amino acid analogues using an optimized suppressor tRNAPro that we designed. While these analogues can generally be incorporated into proteins only in systems containing modified ribosomes specifically selected for their incorporation, we found that EF-P could significantly enhance their incorporation into model protein dihydrofolate reductase using wild-type ribosomes. Plausibly, the increased yields observed in the presence of structurally diverse amino acid analogues may result from the formation of a stabilized ribosomal complex in the presence of EF-P that provides more favorable conditions for peptide bond formation. This finding should enable the facile incorporation of a much broader structural variety of amino acid analogues into proteins and peptides using native ribosomes.

Fast Solution-Phase and Liquid-Phase Peptide Syntheses (SolPSS and LPPS) Mediated by Biomimetic Cyclic Propylphosphonic Anhydride (T3P®).

The growing applications of peptide-based therapeutics require the development of efficient protocols from the perspective of an industrial scale-up. T3P® (cyclic propylphosphonic anhydride) promotes amidation in the solution-phase through a biomimetic approach, similar to the activation of carboxylic moiety catalyzed by ATP-grasp enzymes in metabolic pathways. The T3P® induced coupling reaction was applied in this study to the solution-phase peptide synthesis (SolPPS). Peptide bond formation occurred in a few minutes with high efficiency and no epimerization, generating water-soluble by-products, both using N-Boc or N-Fmoc amino acids. The optimized protocol, which was successfully applied to the iterative synthesis of a pentapeptide, also allowed for a decrease in the solvent volume, thus improving process sustainability. The protocol was finally extended to the liquid-phase peptide synthesis (LPPS), where the isolation of the peptide was performed using precipitation, thus also showing the suitability of this coupling reagent to this emerging technique.

Kinetic Modeling and Parameter Estimation of a Prebiotic Peptide Reaction Network.

Although our understanding of how life emerged on Earth from simple organic precursors is speculative, early precursors likely included amino acids. The polymerization of amino acids into peptides and interactions between peptides are of interest because peptides and proteins participate in complex interaction networks in extant biology. However, peptide reaction networks can be challenging to study because of the potential for multiple species and systems-level interactions between species. We developed and employed a computational network model to describe reactions between amino acids to form di-, tri-, and tetra-peptides. Our experiments were initiated with two of the simplest amino acids, glycine and alanine, mediated by trimetaphosphate-activation and drying to promote peptide bond formation. The parameter estimates for bond formation and hydrolysis reactions in the system were found to be poorly constrained due to a network property known as sloppiness. In a sloppy model, the behavior mostly depends on only a subset of parameter combinations, but there is no straightforward way to determine which parameters should be included or excluded. Despite our inability to determine the exact values of specific kinetic parameters, we could make reasonably accurate predictions of model behavior. In short, our modeling has highlighted challenges and opportunities toward understanding the behaviors of complex prebiotic chemical experiments.

Hybrid insulin peptide isomers spontaneously form in pancreatic beta-cells from an aspartic anhydride intermediate

Hybrid insulin peptides (HIPs) form in beta-cells when insulin fragments link to other peptides through a peptide bond. HIPs contain nongenomic amino acid sequences and have been identified as targets for autoreactive T cells in type 1 diabetes. A subgroup of HIPs, in which N-terminal amine groups of various peptides are linked to aspartic acid residues of insulin C-peptide, was detected through mass spectrometry in pancreatic islets. Here, we investigate a novel mechanism that leads to the formation of these HIPs in human and murine islets. Our research herein shows that these HIPs form spontaneously in beta-cells through a mechanism involving an aspartic anhydride intermediate. This mechanism leads to the formation of a regular HIP containing a standard peptide bond as well as a HIP-isomer containing an isopeptide bond by linkage to the carboxylic acid side chain of the aspartic acid residue. We used mass spectrometric analyses to confirm the presence of both HIP isomers in islets, thereby validating the occurrence of this novel reaction mechanism in beta-cells. The spontaneous formation of new peptide bonds within cells may lead to the development of neoepitopes that contribute to the pathogenesis of type 1 diabetes as well as other autoimmune diseases.